Shears

The RS series of demolition shears have been designed to satisfy your primary demolition needs.  They have been designed with particular care for materials.  RS shears demolish concrete, reducing noise and vibrations.

•      They are made entirely of HARDOX and WELDOX;

•       Machines have two big cylinders.

•      Some models have regenerative installation.

•       Hydraulic rotation.

•        An integrated hydraulic installation permits the shear to make a continuous 360˚ rotation in both directions to have a fast, accurate and efficient positioning of the jaw in any work condition.  It is good for those who use excavators with very long arms.

·        Mechanical rotation: a clutch permits a 360˚ rotation in both directions that is ideal for excavators that do not have a rotation installation.

Dimensions and Technical Data	RS 500	RS 1000	RS 1500	RS 1800	RS 2000	RS 2500
Excavator weight (ton)	4 to 10	12 to 16	16 to 22	22 to 30	30 to 40	30 to 50
Equipment Weight (Kg)	380	1150	1400	1900	2200	2900
Max pressure (bar)	250	300	300	310	320	320
Oil max capacity (L/min)	30 to 50	220	220	240	260	260-300
Tightening force on the tips (ton)	50	90	100	120	140	160
Blades tightening force (ton)	80	135	140	160	180	200
Rotation oil capacity (L/min)	1 to 2	30 to 40	30-40	30-40	30	40-50
Rotation oil pressure (bar)	20	70-80	70-80	70-80	70-80	90-100
A(mm)	1020	1700	2100	2300	2300	2700
B(mm)	310	400	510	630	680	850
C(mm)	405	600	710	840	920	1100
D(mm)	750	1100	1150	1170	1500	1530

 

SH Scrap Shears have been designed for demolishing iron structure and for cutting structural steel, pipes, tanks, sheets and iron carcasses.  The innovative design and the steels used assure big cutting force and acceptable weights.  They have been entirely built with HARDOX 400 and have the following characteristics:

·        A regenerative circuit

·        360˚ hydraulic rotation

·        A Cylinder entirely protected.

·        Interchangeable blades

·        A register for a precise alignment of the blades also in the most stressing working conditions.

Dimensions and Technical Data	SH 18	SH 30	SH 40
Excavator weight (ton)	20-30	28-40	38-50
Equipment Weight (Kg)	1950	3250	4200
Max pressure (bar)	300	320	320
Max oil capacity (L/min)	220	260	320
Rotation pressure (bar)	70-80	70-80	70-80
Rotation oil capacity (L/min)	30	30	30
Cutting force (ton)	150	200	285
Tondo (mm)	65	80	100
Steel plate (mm)	15	20	22
L' steel structure (mm)	150x15	180x15	220x20
IPE' steel structure (mm)	270	320	440
HEA' steel structure (mm)	150	220	300
A(mm)	2980	3645	4020
B(mm)	460	565	670
C(mm)	520	620	700

 

The multifunction MC OSA shear is the best expression of functionality and versatility.   Thanks to the many kits that can be applied to the principal structure of the machine, the MC series satisfies every need and every situation during demolition.

·        The machine has two big hydraulic cylinders and 360˚ rotation.

·        The structure is made entire of HARDOX and WELDOX

·        Some models have a regenerative installation.

·        Hydraulic rotation

·        An integrated hydraulic installation permits the shear to make 360˚ rotation in both directions giving it a fast, accurate and efficient position of the jaws in any working condition.  It is suitable for operators who are going to use excavators with very long arms.

·        Mechanical rotation, a clutching installation permits a continuous 360˚ rotation in both directions.  It is ideal for excavators which do not have rotation installation.

Pulveriser Kit:  It is particularly indicated for secondary demotion.  It separates rods from concrete.

Combo-cutter Kit:  It is ideal for mixed demolitions—concrete and metallic structures.

Shear Kit:  It has been designed for cutting ferrous materials, structural steel, pipelines, tanks, sheets and ferrous carcasses.

Crusher Kit:  It has been designed for primary demolition—demolition of concrete structures.

Sheet Kit:  This kit permits the cutting of sheets on the ground and at the same time to demolish metallic tanks.  Precise cutting without mistakes.

Dimensions and Technical Data	MC 5	MC 15	MC 18	MC24	MC 40
Excavator weight with MC at the bucket's place (ton)	4 to 10	14-19	18-26	26-36	36-50
Equipment Weight (Kg)	400	1400	1900	2450	3800
Equipment height (mm)	1020	1900	2050	2200	2600
Working pressure (bar)	250	320	320	320	320-350
Oil max capacity (L/min)	30-50	220-240	220-240	220-260	280-320
Type of rotation (bar)	mechanical or hydraulic	mechanical or hydraulic	360˚ hydraulic	360˚ hydraulic	360˚ hydraulic
Engine rotation max expression (L/min)	20	70	70-80	70-80	100-115

OSA Demolition Equipment has improved its RV series!

OSA RV series has been renewed and modified very recently in its design and hydraulic system. The new series offers more than 30% of pulverizing power.

- a reversed cylinder with an internal hydraulic distribution gives a better protection of the rod in the case;

- a new regenerative system for fast working cycles;

- interchangeable wear and tear parts in special steel to give the operator the possibility to have a demolition attachment which is always efficient;

- a new rotating system with stronger gear-motors with protection valves.

Dimensions and Technical Data	RV 16	RV 20	RV28	RV 38
Excavator weight (ton)	16-20	21-28	28-40	35-60
Equipment Weight (Kg)	1600	2000	2800	3800
Max pressure (bar)	310	320	330	330
Max oil capacity (L/min)	220	260	300	320
Tightening force on the tips (ton)	135	150	170	190
Blades tightening force(ton)	180	200	230	250
Rotation Oil capacity (L/min)	30-40	30-40	50-60	50-60
Rotation oil capacity (bar)	70-80	70-80	90-100	90-100
A(mm)	680	760	910	1050
B(mm)	2130	1950	2460	2780
C(mm)	490	500	550	600
D(mm)	200	200	240	240

 

The FPV series pulverizers have been designed to work on the ground. They satisfy all of the secondary demolition needs and they make a perfect recycling and pulverization work.  For this reason, all the next phases regarding the charge and the transport of materials will be easier and simpler.

·        A HARDOX steel structure.

·        A cylinder completely protected by a casing and a specific carter.

·        Fast work for a bigger productivity thanks to a regenerative installation made in the machine. It permits it to obtain fast idle movements and a maximum thrust in seconds.

·        Interchangeable blades.

Dimensions and Technical Data	FPV 12	FPV 17	FPV 20	FPV 28	FPV 60
Excavator weight (ton)	10 to 16	16-20	21-29	30-45	40-70
Equipment Weight (Kg)	1120	1740	2100	2900	5300
Max pressure (bar)	300	310	320	330	350
Max oil capacity (L/min)	180	220	260	300	300
Blades tightening force(ton)	130	160	190	250	290
Tip tightening force (ton)	90	120	140	170	190
A(mm)	640	810	910	1090	1160
B(mm)	1675	2000	2300	2700	2800
C(mm)	435	500	530	580	640
D(mm)	140	200	200	240	240

 

 

Atlantic Attachment Services is representing the OSA line of shears and pulverisers.  They are top quality, Italian made with Hardox 400, 24 hour parts Canada wide. Delivered to Canada within 4-5 weeks!